Driver Converter Stick Ps2 Bios

fullpacsecond.netlify.com › Driver Converter Stick Ps2 Bios ★

Ps2 keyboards arent worth troubleshooting end of story. It would be like troubleshooting your VCR- its dead technology.The Ps2 connectors are notorious for crapping out time and time again whereas USB keyboards and mice are much more reliable. Even the Ps2 to USB or USB to Ps2 converter connectors are notorious for crapping out BECAUSE IT INVOLVES PS2.Also Mr. Mortuuspus if you read his posting closely you'll notice he starts out by saying 'it flickers when i start the pc but after that it is off,' implying he has it plugged in but then ceases operation AT BOOTUP.So rohansamal.I still recommend.get a new keyboard. We all think that PS2 keyboard/mouse are dead devices in this day and age however, the latest Asus motherboard that supports Windows 8 actually has the PS2 mouse/keyboard ports. For example, M5A97 LE R2.0Just try reseating the keyboard, you may have not pushed it in properly or it somehow became disconnected.

Driver Converter Stick Ps2 Bios System

If the IO panel for the rear ports is not fitted correctly, it can cause the fitting for mouse/keyboard/usb cables etc to be improper and make connection erratic or not at all.The thing about PS2 is that you can reseat the keyboard/mouse at anytime without restarting. It's like a hot-plug device.On boot up, the light on the keyboard should be on but as soon as the POST has past, the light should go off. Get a new keyboard.i will. But no interim solution?Got same insane problem and no USB keyboard around.

Luckily had a laptop. Do this: make xxxx.bat file and put there line 'regedit' and run the.bat (from USB stick using USB mouse) and edit In HKEYLOCALMACHINESYSTEMCurrentControlSetServicesi8042prt, edit the Start value and set it to a hex or decimal value of 1. Reboot and P/S2 works now.My mouse was working fine until this morning. I tried the above fix and it worked the first time. Thank you very much for finding a solution to this issue. Got same insane problem and no USB keyboard around.

/quotemsg-Hi PS/2 keyboard users, I signed up to post this just because it is so frustrating.I have a different solution. The BIOS handles the PS/2 natively, but it's quite flaky, so here is what I have to do to key my Model M to work (One of 7 I have which I hope will last me the rest of my life) on Win7 (my (old) Terabyte Linux backup software sees the PS/2 just fine and doesn't see the USB 3.0 at all.):Win 7 wouldn't let me edit that i8042prt value. Turns out there's something funky in the BIOS.My motherboard is a new MSI Z87-G45 with the stupid fancy BIOSTo get Win7 to use PS/2 keyboard, boot to BIOS (have to perform each time you change a piece of hardware, SATA, Graphics card, etc.) Procedure:1. Plug in both USB keyboard and PS/2 keyboard3. Boot to BIOS (hitting del on my USB keyboard, because it won't see the PS/2 keyboard)4.

Hot unplug the USB keyboard while in the BIOS5. Exit the BIOS with the 'Save and Exit' BIOS option (via USB mouse)6. Win7 can see the PS/2 keyboard upon reboot.This appears to be necessary every time the BIOS see a new SATA device. It does not appear to be necessary when you plug in a new USB device.- JoeP.S. 'Get a new keyboard' is really not helpful. My ps2 keyboard is not working.

Driver Converter Stick Ps2 Bios System

It flickers when i start the pc but after that it is off. I have tried rebooting and replugging the keyboard but no use.please helpDid this just happen after a recent Microsoft update? Because a lot of people are finding their ps/2 ports have quit working and problems with some pci-usb drivers. I have been trying to fix this for three days, but no solutions yet. Will write back when I find out just which update is messing things up. But you can probably be sure your mouse and keyboard are fine.

Test them on another comp. If you can, just to be sure.

In my case I was able to use one front usb hub to run a different mouse. My ps2 keyboard is not working. It flickers when i start the pc but after that it is off.

I have tried rebooting and replugging the keyboard but no use.please helpDid this just happen after a recent Microsoft update? Because a lot of people are finding their ps/2 ports have quit working and problems with some pci-usb drivers. I have been trying to fix this for three days, but no solutions yet. Will write back when I find out just which update is messing things up. But you can probably be sure your mouse and keyboard are fine.

Test them on another comp. If you can, just to be sure. In my case I was able to use one front usb hub to run a different mouse.Hi, updated answer here. My MSI-G45 is still a bit flaky handling the PS/2 keyboard. To get it to work after a power off,1. Let the PC boot to Win7.2. Use the USB mouse to hit 'reboot' in Win7.3.

After the warm reboot, the PS/2 works.Booting to the BIOS and using a USB keyboard seems to be unnecessary.Since the MSI, I've also built a new ASUS motherboard computer. The ASUS handles the PS/2 keyboard flawlessly. The MSI still works as described in the 1st paragraph. If you have a PS/2 keyboard, you might want to stick with ASUS motherboards. Just a guess.In my experience, this problem has nothing to do with any Microsoft update, but with a motherboard which just doesn't handle the PS/2 very well.

I would suspect that the device the BIOS presents to Windows isn't quite correct the first time. Or some such fubar.Joe. My ps2 keyboard is not working. It flickers when i start the pc but after that it is off. I have tried rebooting and replugging the keyboard but no use.please helpDid this just happen after a recent Microsoft update? Because a lot of people are finding their ps/2 ports have quit working and problems with some pci-usb drivers. I have been trying to fix this for three days, but no solutions yet.

Will write back when I find out just which update is messing things up. But you can probably be sure your mouse and keyboard are fine. Test them on another comp. If you can, just to be sure. In my case I was able to use one front usb hub to run a different mouse.Hi, updated answer here.

My MSI-G45 is still a bit flaky handling the PS/2 keyboard. To get it to work after a power off,1. Let the PC boot to Win7.2. Use the USB mouse to hit 'reboot' in Win7.3. After the warm reboot, the PS/2 works.Booting to the BIOS and using a USB keyboard seems to be unnecessary.Since the MSI, I've also built a new ASUS motherboard computer. The ASUS handles the PS/2 keyboard flawlessly. The MSI still works as described in the 1st paragraph.

If you have a PS/2 keyboard, you might want to stick with ASUS motherboards. Just a guess.In my experience, this problem has nothing to do with any Microsoft update, but with a motherboard which just doesn't handle the PS/2 very well. I would suspect that the device the BIOS presents to Windows isn't quite correct the first time. Or some such fubar.JoeThat is sort of correct in that it seems to be both a combination of Motherboard type and Windows security updates. I have a PDS Vector and an IBM XP3200 The PDS was unaffected (Though I use Wireless USB keyboard and Mouse with it.) However The IBM worked fine for the last two years until the latest updates, then the mouse started sticking at the log in screen, then after another security update stopped altogether. Other are having the same issue. So the update only seems to interfere with certain motherboards.

I had to uninstall 10 different updates (8 of them security) and now it (the IBM) works just fine, no problems. Get a new keyboard.i will. But no interim solution?Got same insane problem and no USB keyboard around. Luckily had a laptop. Do this: make xxxx.bat file and put there line 'regedit' and run the.bat (from USB stick using USB mouse) and edit InHKEYLOCALMACHINESYSTEMCurrentControlSetServicesi8042prt, edit the Startvalue and set it to a hex or decimal value of 1.

Reboot and P/S2 works now.what do u mean by put there line 'regedit' and run the.bat file? I dont get it. How can i do it?

Ty in adv ^^. My ps2 keyboard is not working. It flickers when i start the pc but after that it is off.

I have tried rebooting and replugging the keyboard but no use.please helpits simple really. I recently had the same problem. Beacause ists an olf interface the ps/2 keyboard does not permit hot plug. So basically, you just need to power off your computer.REMOVE THE POWER CABLE, and that is the most important part, and the plug in your ps/2 keyboard. Now plug the cable back in, power it on and is should work just fine.you probably bought a new keyboard by now, but. Next time you'll know.

My ps2 keyboard is not working. It flickers when i start the pc but after that it is off. I have tried rebooting and replugging the keyboard but no use.please helpits simple really. I recently had the same problem. Beacause ists an olf interface the ps/2 keyboard does not permit hot plug.

So basically, you just need to power off your computer.REMOVE THE POWER CABLE, and that is the most important part, and the plug in your ps/2 keyboard. Now plug the cable back in, power it on and is should work just fine.you probably bought a new keyboard by now, but. Next time you'll knowActually, that was a basic first-step in trouble shooting, and did not work in this case, nor for a few others. Seems the more updated Win 7 becomes the more glitchy it can become with SOME older systems, there are others with jumpy mouse issues or click-through problems that also seem to be more recent. An original un-updated install seems to work quite well on the older models, but when fully updated some of these simple things just become glitchy.I went to a USB keyboard and was done with it, but Ps2 is usually good to have for emergency recovery reasons if USB drivers or hardware quits working. Get a new keyboard.i will. But no interim solution?Got same insane problem and no USB keyboard around.

Luckily had a laptop. Do this: make xxxx.bat file and put there line 'regedit' and run the.bat (from USB stick using USB mouse) and edit In HKEYLOCALMACHINESYSTEMCurrentControlSetServicesi8042prt, edit the Start value and set it to a hex or decimal value of 1. Reboot and P/S2 works now.-Hi PS/2 keyboard users, I signed up to post this just because it is so frustrating.I have a different solution.

The BIOS handles the PS/2 natively, but it's quite flaky, so here is what I have to do to key my Model M to work (One of 7 I have which I hope will last me the rest of my life) on Win7 (my (old) Terabyte Linux backup software sees the PS/2 just fine and doesn't see the USB 3.0 at all.):Win 7 wouldn't let me edit that i8042prt value. Turns out there's something funky in the BIOS.My motherboard is a new MSI Z87-G45 with the stupid fancy BIOSTo get Win7 to use PS/2 keyboard, boot to BIOS (have to perform each time you change a piece of hardware, SATA, Graphics card, etc.) Procedure:1. Plug in both USB keyboard and PS/2 keyboard3.

Boot to BIOS (hitting del on my USB keyboard, because it won't see the PS/2 keyboard)4. Hot unplug the USB keyboard while in the BIOS5. Exit the BIOS with the 'Save and Exit' BIOS option (via USB mouse)6. Win7 can see the PS/2 keyboard upon reboot.This appears to be necessary every time the BIOS see a new SATA device. It does not appear to be necessary when you plug in a new USB device.- JoeP.S.

'Get a new keyboard' is really not helpful./quotemsgI just logged in to upvote and say huge thanks, it worked to me.Thank you.